Forage Harvester

Due to very good response of Reaper-Binder, its production has been differentiated with this yet another amazing machine called the Fodder-Harvester .

This machine is highly accepted by the farmer owing to its extremely low Operating as well as Maintenance cost. Fodder Harvester is mainly used for Fodder crops like Barseem, Lucern, Mentha and other Green Fodder.

SPECIAL FEATURES

• Harvesting and Windrowing of Fodder crops.
• Harvesting of 1 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• This machine can be converted into Reaper Binder by simply changing the Cutter Bar attachment.
• A sprayer attachment with capacity of 250 ltr. can be mounted on the same machine.
• Reaper Attachment for suitable cutting of Paddy and other crops having height more than 5 feet can be used with same machine.

With the tremendous success of Three wheel Fodder Harvester and growing demand of farmers for a self propelled luxury model, a new Four wheel Fodder Harvester was born in 2015. This machine was equipped with an efficient hydraulic unit for lifting the cutter bar, Steering with dashboard for ease in accessibility of functions as well as manoeuvring of machine in the field, the raised platform of sulky for comfortable seating posture and clear visibility along with the canopy to provide shade and shelter from sun and weather conditions. The operation of the machine in the field is same because the prime mover and the Fodder Harvester unit is almost similar to the Three wheel machine.

SPECIAL FEATURES : 

• Harvesting and Windrowing of Fodder crops.
• Harvesting of 0.75 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• Mechanical Steering system for easy handling.
• Hydraulic type cutterbar lifting system
• Harvesting and Binding of 0.75 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• Reaper Binder attachment for Harvesting wheat, Paddy and Other grain Crops can also be attached to the same machine.
• Reaper Attachment for suitable cutting of Paddy and other crops having height more than 5 feet can be used with same machine.

The 404 is the smallest and most dynamic of the BCS disc mover. Designed to be used on low powered tractor is identified by extreme lightness and quick adaptability to the means to which it is entrusted. The single frame is compact and has been designed with a third special point incorporated, the whole permitting the machine's hydraulic lifting, supplied as standard, allows the operator to direct the cutting bar while staying comfortable seated on the tractor. A single effect distributor in needed to operate it. Bar excursion is 900 upward and 350 downwards. A spring linkage regulates the round pressure of the cutting bar. The four disc of the 404 are supported by eight small helical cutting blades. Two cones located on the first and last disc act as conveyor of the forage facilittation formation of the pathway.

SPECIAL FEATURES :

• Tractor PTO Operated:  Easily operated by tractor PTO (35 hp or above)
• Sharp Cutting :  With 4 Discs with 8 Helical Cutting Blades
• Two Cones Conveyers:  Works to make pathway for cutting fodder crops.
• Hydraulic Lifting:  To lift the cutting bar during transportation & turning in field.
• Beam Balancing Springs:  To balance the machine during the cutting operation
• Special wear - proof slides :  To protect the housing of cutting bar and discs at the time of operations

The Rotex conditioning is done by crushing and fragmenting the plant,s stem in order to dry at the same time as the leaf, therefore reduce drying times by over 50% and reduce the exposure of Forage to climatic risks. The nutritional characteristics of the crop also remains unchanged.

SPECIAL FEATURES : 

• The Roller Conditioning is done by crushing and fragmenting the plant’s stem in order to dry at the same time as the leaf.
• Tractor PTO Operated:  Easily operated by tractor PTO (45 hp or above)
• Sharp Cutting :  With 5 Discs with 10 Helical Cutting Blades
• Two Cones Conveyers:  Works to make pathway for cutting fodder crops.
• Hydraulic Lifting:  To lift the cutting bar during transportation & turning in field.
• Beam Balancing Springs:  To balance the machine during the cutting operation
• Special wear - proof slides :  To protect the housing of cutting bar and discs at the time of operations

The Rotex5 is the smallest and most dynamic of the BCS disc movers. Designed to be used on low powered tractors is identified by extreme lightness and quick adaptability to the means to which it is entrusted. The single frame is compact and has been designed with a third special point incorporated, the whole permitting the machine's overhange to be limited to the minimum once lifited to the tractor, optimising weight distribution in the combination. The hydraulic lifiting enables the Bar excursion by 900 upward and 350 downwards. A spring linkage regulates the round pressure of the cutting bar. The five disc of the Rotex 5 are supported by ten small helical cutting blades. Two cones located on the first and last disc act as conveyor of the forage facilittation formation of the pathway.

SPECIAL FEATURES :

• Tractor PTO Operated:  Easily operated by tractor PTO (45 hp or above)
• Sharp Cutting :  With 5 Discs with 10 Helical Cutting Blades
• Two Cones Conveyers:  Works to make pathway for cutting fodder crops.
• Hydraulic Lifting:  To lift the cutting bar during transportation & turning in field.
• Beam Balancing Springs:  To balance the machine during the cutting operation
• Special wear - proof slides :  To protect the housing of cutting bar and discs at the time of operations